Télécharger Imprimer la page

Steelcase Elective Elements Instructions De Montage page 2

Publicité

Les langues disponibles

Les langues disponibles

®
VERIFY WALL CONSTRUCTION
WARNING
Adequate wall construction is required to support
the weight of loaded shelves. Minimum wall
construction must be capable of supporting
67 lb/linear ft as shown.
NOTE: Hardware to be provided by installer.
Follow the fastener manufacturer's instructions.
NOTICE: Mounting hardware is to be specified/verified
by the Engineer of Record or approved by local
authority having jurisdiction.
MINIMUM REQUIRED WALL CONSTRUCTIONS:
Drywall with Metal Studs
- Must be at least 25 ga. (0.018" min. thk.) 33 ksi steel studs 1.5" x 3.5"
- Studs on maximum 24" centers
- Must be at least 5/8" thick Type X gypsum drywall
- #6 x 1-1/4" drywall screws on 12" centers
Drywall with Wood Studs
- Stud grade SPF, DF-L or Hem-Fir 1.5" x 3.5"
- Studs on 24" centers
- Must be at least 5/8" thick Type X gypsum drywall
- #6 x 1-1/4" drywall screws on 12" centers
15.00"
381 mm
12.00"
304.8 mm
6.00"
152.4 mm
C.G. Wt. = 67 lb/ft
7.50"
190.5 mm
3.30"
83.72 mm
2.37"
60.22 mm
Page 2 of 30
Doc # 102477 Rev E

Publicité

loading