Dell PowerVault MD1120 Mise En Route page 12

Back-Panel Connectors
SAS connectors (per EMM)
Serial connector (per EMM)
LED Indicators
Front panel
Hard-drive carrier
EMM
Power supply/cooling fan module
Power Supplies
Wattage
Heat dissipation
Voltage
Frequency
Amperage
10
Getting Started With Your System
• One SAS (SFF 8470) "IN" connector
for connection to the host
• One SAS (SFF 8470) "OUT"
connector for expansion to an
additional enclosure
One 6-pin UART mini-DIN connector
(for factory use only)
• One two-color LED indicator
for system status
• Two single-color LED indicators
for power and split mode
• One single-color activity LED
• One two-color LED status indicator
per drive
Three two-color LED status indicators,
one each for the two EMM SAS ports
and one for the EMM status
Three LED status indicators for power
supply status, power supply/fan fault,
and AC status
485 W maximum continuous; 604 W peak
200 W
100–240 V
50/60 Hz
7.5–3.75 A