Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. Hold the crossbar between the posts to align the two mounting holes on both ends of the crossbar with the two
lower mounting holes of each post. Pre-install four hexagon head bolts on both sides and finger-tighten the bolts
and nuts (Fig. 12).
5. Securely tighten all four bolts on both sides by an impact wrench with a 1/2'' (13mm) socket (not included) (Fig. 13).
12
Crossbar
Hexagon head bolts
13
Impact Wrench
GRASS BAGGER KIT — ABK4200
9
Publicité
Table des Matières
