EGO ABK4200 Manuel De L'opérateur page 10

6. Install both bagger assemblies onto the top cover assembly
by inserting the front edge in first, and then setting the back
edge down until it fits into the assembly as shown in Fig. 14.
7. With the side discharge chute of the mower raised up and
held open, install the lower chute tube assembly on the
mower by following these three steps (Fig. 15):
a. Insert the mounting plate into the attachment slot of the
mower.
b. Align the supporting plate on the mower with the slot of the
mounting holder and insert in it.
c. Stretch the spring hook to secure it to the catch hole of the
mower.
15
Catch Hole
10
GRASS BAGGER KIT — ABK4200
Side Discharge Chute
2
3
Spring Hook
14
Mounting Holder
Supporting Plate
Attachment slot
Mounting Plate
2
1
1