Sauder 412995 Mode D'emploi page 9

Step 5
Carefully turn your unit over onto its front edges. Unfold
å
the BACK (G) and lay it over your unit.
Make equal margins along all four edges of the BACK (G). Push
å
on opposite corners of your unit if needed to make it "square".
Fasten the BACK (G) to your unit using the NAILS (1N).
å
NOTE: Perforations have been provided for access
å
through the BACK. Carefully cut out the holes needed.
Fasten four FEET (1E) to the BOTTOM (F). Use four
å
BLACK 9/16" PAN HEAD SCREWS (51S).
1E
www.sauder.com/services
F
BLACK 9/16" PAN HEAD SCREW
(4 used for the FEET)
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
The perforations
should be here.
G
51S
412995
Caution
NAIL
(20 used in this step)
1N
Page 9