Sauder 412995 Mode D'emploi page 10

Step 6
Carefully stand your unit upright.
å
With your hammer, gently tap four SHELF SNAPS (7R)
å
into the holes in the SMALL ADJUSTABLE SHELF (I).
Repeat this step for the other SMALL ADJUSTABLE
SHELF (I).
Insert eight METAL PINS (1R) into the hole locations of your
å
choice in the ENDS (A and B) and UPRIGHTS (C and D).
Set the ADJUSTABLE SHELVES (I) onto the METAL PINS
so the SHELF SNAPS are resting on the PINS. Push on
the SMALL ADJUSTABLE SHELVES until each METAL PIN
"snaps" into the SHELF SNAP.
Push the RUBBER SLEEVES (2R) over the remaining METAL
å
PINS (1R). Insert the METAL PINS into the hole locations of
your choice in the UPRIGHTS (C and D). Set the LARGE
ADJUSTABLE SHELVES (H) onto the METAL PINS.
B
Page 10
H
I
D
412995
(8 used)
7R
C
I
A
H
2R
(8 used)
Hey! It's starting to look
like something!
I
7R
1R
(16 used)
www.sauder.com/services