Publicité
WARNING: Under no circumstances should you try to repair the set
yourself as this will invalidate the warranty.
If a fault occurs, first check the points listed, before taking the set for
repair. If you are unable to solve a problem by following these hints,
consult your dealer or service center.
No power, playback does not start
– Insert the batteries correctly.
– Replace the batteries.
– Connect the power adapter securely.
Hold indication and/ or no reaction to controls
– Deactivate HOLD.
– Disconnect the set from the power supply or take out the batteries
for a few seconds.
No sound or bad sound quality
– Press 2; to resume playback.
– Adjust the volume.
– Check and clean the connections.
– Keep this set away from active mobile phones or strong magnetic
fields.
pls insert CD or No audio file indication
– Insert a disc, label upwards.
– Clean or replace the disc.
– Wait until the steamed up lens has cleared.
– Make sure you have inserted an audio disc or an MP3-CD.
Music file is not played
– Make sure that the file names of the MP3 files end with .mp3
Missing directories on MP3-CD
– Make sure the total number of files and albums on your MP3-CD
does not exceed 350.
– Only albums with MP3 files are shown.
The disc skips tracks
– Clean or replace the disc.
– Make sure repeat, repeat album, shuffle or prog are not
selected.
Music skips or popping sound when playing an MP3 file
– Play the music file on your computer. If the problem persists,
encode the audio track again and make a new CD-ROM.
Music is interrupted and Oops indication
– Switch ESP on.
In-car use: No power, playback does not start
– Clean the cigarette lighter jack.
– Switch on the ignition of your car.
In-car use: No sound or bad sound quality
– Insert the adapter cassette correctly.
– Change the autoreverse direction of your car cassette player.
– Let the set adjust to the temperature in the car.
TROUBLESHOOTING
Publicité
