Electrical Safety - Black & Decker PRO Serie Mode D'emploi

Caution: Wear appropriate hearing protection
during use. Under some conditions and duration
ofuse, noise from this product may contribute to
hearing loss.
Caution:Spark deflector will get hot. Avoid
touching or adjusting while hot. Keep cordset and
materials away from spark deflector.
• Avoid prolonged contact with dust from power
sanding, sawing, grinding, drilling, and other
construction activities. Wear protective clothing and
wash exposed areas with soap and water. Allowing
dust to get into your mouth, eyes, or lay on the skin may
promote absorption of harmful chemicals.
Warning: Always use NIOSH/OSHA approved
respiratory protection appropriate for the dust
exposure. Direct particles away from face and
body.For your convenience and safety, the following
warnings are on your Heavy-Duty 14" (355mm) Chop Saw:
For safe operation read the instruction manual.
• Do not use toothed blades.
• Use only reinforced wheels rated 4100 rpm or higher.
• When servicing use only identical replacement
parts.
• Always: wear eye protection, use guards, clamp
work in vise, use proper respiratory protection.
• Do not expose to rain or use in damp locations.
• Only use chop saw wheel of a max. Thickness of
2.8mm and a max. Diameter of 355mm.
Warning symbols
The label on your tool may include the following symbols:
.......................Use Eye Protection
.......................Use Ear Protection
V .......................Volts
All manuals and user guides at all-guides.com
A .......................Amperes
Hz .......................Hertz
W .......................Watts
min.......................minutes
n0 .......................No load speed
.../min...................Revolutions or reciprocationsper minute

Electrical safety

equally qualified person in order to avoid damage or injury.If
the power cord is replaced by an equally qualified person,
but not authorized by Black &Decker, the warranty will not
be valid.
Features (fig. 1, 4)
A. Lock on Switch
B. Spark Deflector Screw
C. Spark Deflector
D. Base
E. Fence
F. Vise
G. Flat Wrench
H. Crank
.......................Alternating current
.......................Direct current
.......................Class II Construction
.......................Earthing terminal
.......................Safety alert symbol
Warning! If the power cord is damaged, it must
bereplaced by the manufacturer,
authorizedBlack & Decker Service Center or an
ENGLISH
5