7: Adding Service Devices - Danfoss Link CC Guide D'installation

Installation Guide

7: Adding service devices

Danfoss Link™ CC - Configuration
Danfoss Link™ supports many different types of service devices with functions both like simple ON/OFF
devices for other electrically equipment, signal repeaters and controllers for hydronic systems.
Remove the front cover and press the Set-Up pin for 3 seconds.
1. Select Rooms and Devices.
4. Enter/Edit Device Name.
VISGL45X © Danfoss
2. Select Add Service Device.
04/2011
3. Select Begin Registration.
GB
9