1: Adding Devices To An Existing Room - Danfoss Link CC Guide D'installation

Installation Guide
1: Adding devices to an
existing room
Danfoss Link™ CC - Modifying an existing installation
Remove the front cover and press the Set-Up pin for 3 seconds.
1. Select Rooms and Devices.
4. Select Room Devices.
Continue until all new devices are added to desired room.
Perform a network test each time the installation has been modified.
VISGL45X © Danfoss
2. Select Manage Existing Room.
5. Select Add a Device.
04/2011
3. Select an existing room.
6. Select Begin Registration.
GB
11