Ceiling Hole For Square Luminaire Variant - Lithonia Lighting LDN8 Mode D'emploi

D) Non-accessible Ceiling Installation (e.g. plaster, drywall, etc.)
1
Bend channel bars at the hook feature.
Mount to joists with flanges on channel
bars resting against the bottom faces of
the joists. Drive nail into joist to secure.
Move vertical adjustment to lowest point.
E) Ceiling Hole for Square Luminaire Variant
1
READ SECTION C-1 PRIOR TO CONTINUING.
Use a laser or other accurate method to
ensure that your template marks are
aligned.
4
Using a keyhole saw, cut on sketched line.
Return to section C-2 to complete the
installation.
2
Sketch an 8 ¾" x 8 ¾" template onto the
ceiling.
Lithonia Lighting
1400 Lester Road Conyers Georgia 30012
P 800 315 4982 F 770 860 3129
www.Lithonia.com
3
Drill a small hole at two corners of the
sketched template.
CJ5201055 Rev. A
© Acuity Brands Lighting, Inc. 2016
All Rights Reserved
Page 5
.