V-Guide Operation (Parental Control) - Sanyo CLT1554 Manuel D'instructions

V-Guide (Parental Control) Information
QuickTips
When in the V-Guide
■
menu system, the
– /+ keys allow you
to navigate between
the ratings and the
options menu.
Blocking TVY7 does
■
not block higher
ratings.
You can block a
■
content rating such
as TVPG-V and still
be able to watch
TVPG programs with
ratings of S-L-D
provided TVPG is
unblocked (U).
To temporarily
■
unblock or view
Blocked (B)
programs, set
V-GUIDE to OFF, or
press the RESET
key twice to clear all
Blocked (B) ratings
and other customized
settings.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
14
V-Guide (Parental Control)
NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF
AMERICA'S FCC V-CHIP REGULATIONS. THEREFORE, IT MAY NOT FUNCTION
WITH BROADCASTS THAT ORIGINATE IN OTHER COUNTRIES.
This Sanyo television is equipped with an electronic V-Chip to interpret MPAA and TV Parental
Guidelines rating codes. When these codes are detected, the TV will automatically display or block
the program, depending upon choices you make when setting up the V-Guide system.
The V-Guide system contain both age-based and content-based settings. This gives parents
discretionary ways of choosing appropriate material for their children to view.
Content ratings are represented by the initials D (Suggestive Dialog), L (Adult Language),
S (Sexual Situations), V (Violence), and FV (Fantasy Violence). When programming contains any
or all of these conditions, these letters become part of the icon that is displayed on the TV screen.
A rating icon will generally appear in the upper left hand corner of the TV screen for
about fifteen seconds.
V-Guide Operation
Use this feature to supervise television viewing for young children. This television can be set to
automatically block programs with content you deem as inappropriate for your children to view.
The ability of the television to block the reception of specific programming content depends
upon several conditions: 1) The program must be rated, 2) Networks must broadcast the rating
code data, 3) Cable companies must transmit the rating code signal, and 4) The TV must be
properly setup to decode the signal.
Setting a Rating
1. Press the V-GUIDE key on the remote control
to display menu.
2. Press the – /+ keys to switch V-Guide ON.
3. Press the + key to access Ratings: MPAA
Ratings or TV Ratings. (➡ Arrow indicates
selection.)
Setting a MPAA Movie Rating
4. Use the ▲ / ▼ keys to block ratings: G, PG,
PG-13, R, NC-17, and X.
5. Press the + key to set the BLOCKED rating.
(√ Check mark indicates Blocked rating.)
Note:
The TV will automatically block (B) ratings
above or unblock (U) ratings below selection.
For example, if you block rating R, NC17 and X
will be blocked as well.