LG MFL71798804 Mode D'emploi page 86

global_main.book.book Page 28 Thursday, May 12, 2022 6:03 PM
OPERATION
28
Dispenser Control Panel
a Fridge
Press this button repeatedly to select a desired temperature between 1 °C and 7 °C.
• The default fridge temperature is 3 °C.
NOTE
• The actual inner temperature varies depending on the food status, as the indicated setting temperature
is a target temperature, not actual temperature within the appliance.
*1
Non Plumbing
b
The Non Plumbing icon is illuminated when the water dispenser tank is installed correctly.
c Freezer
Press this button repeatedly to select a desired temperature between -23 °C and -15 °C.
• The default freezer temperature is -18 °C.
*1
d Self Care
UV light is used to keep the water outlet clean. UV clean function runs automatically for 10 minutes
every hour or can be manually activated at anytime.
Press this button to activate it manually.
NOTE
• This function will momentarily stop each time the Water button is pressed if it is in operation and will
resume the function after 1 hour.
• This function runs automatically for 10 minutes every hour without pressing the Self Care button.
• When UV clean function is activated the LED on the dispenser control panel lights up.
• UVnano is a compound word derived from the words UV and its unit, nanometer.
e Wi-Fi
This button allows the appliance to connect to a home Wi-Fi network. Refer to Smart Functions for
information on the initial setup of the LG ThinQ application.
f Express Cool
This function can quickly cool a large amount of foods such as vegetable, fruit and so on.
• This function is enabled and disabled in turn each time you press the button.
• This function automatically terminates after a specific period has passed.
Express Freeze
g
This function can quickly freeze a large amount of ice or frozen foods.