Levelling The Appliance - LG MFL71798804 Mode D'emploi

global_main.book.book Page 18 Thursday, May 12, 2022 6:03 PM
INSTALLATION
18
NOTE
- Spanner Type A
- Spanner Type B

Levelling the Appliance

The appliance has two front levelling legs. Adjust
the legs to alter the tilt from front to back or side to
side. If the appliance seems unsteady, or the doors
do not close easily, adjust the appliance's tilt using
the instructions below.
Use the spanner to adjust the height by turning
a
the levelling leg to the left to raise it or to the right
to lower it.
NOTE
• Leveling the doors may not be possible when the
floor is not leveled, or is of weak or poor
construction.
• The refrigerator is heavy and should be installed
on a rigid and solid surface.
• Some timber flooring may cause levelling
difficulties if it flexes excessively.
Door Alignment for Freezer and
Fridge Door
If the door of the appliance is not level, adjust the
difference in the height of appliance door.
1
Open the door and use the spanner
loosen the keeper nut by turning it to the left.
2
Use the spanner to adjust the height by
b
turning the adjustment hinge pin to the left or
to the right.
CAUTION
• Do not adjust the height of the appliance door
more than 3 mm.
to
a