Uline H-9688 Guide Rapide page 2

NOTE: Do not over-tighten bolts. Only use hand
tools. Do not use power tools.
1. Place left side panel on ground with flat side down.
2. Attach back panel to side panel using four 1/4-20 x 2"
bolts and nuts. (See Figure 1)
Figure 1
Left Side Panel
3. Stand upright and attach right side panel to back
using four 1/4-20 x 2" bolts and nuts. (See Figure 2)
Figure 2
PAGE 2 OF 9
ASSEMBLY
Back Panel
4. Lay cabinet down on back panel.
5. Attach top panel to side and back panels using
eight 1/4-20 x 0.625" bolts and nuts. Tighten bolts
along the back panel only. Leave bolts toward the
front of the cabinet loose. (See Figure 3)
Figure 3
6. Attach bottom shelf to back and side panels using
four 1/4-20 x 2.75" bolts and nuts each. (See Figure 4)
Figure 4
7. Repeat step 6 for any additional shelves.
1121 IH-9688