Operating Instructions
MaxLite WallMax™ Cutoff
®
Installation & Operation - Conduit Mounting: (Continued)
10. Reinstall the heatsink and
reconnect the terminals
between the CCT Switch
and the LEDs.
© Copyright 2021. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
11. Close the fixture and secure it with
the two (2) screws loosened in
step 2.
12. Make sure the installation is
complete before turning the
power back on.
ON
OFF
WPC Series
Page: 6
REV: 10/29/21