Installing The Sink Drain (Applicable To All Sinks) - NewAge Products Home Cabinet Sinks Guide D'installation

Installing the Sink Drain
1
Parts required
Tailpiece
Locking Nut
Anti-Friction
Locking Nut
Ring
4 -1/4"
Rubber Washer
Insert the drain body into drain opening
2
and press into plumber's putty.
Clean off excess plumbers putty from
4
inside of sink and around the drain.
24
Drain Drain Body
Tailpiece Plastic
Tailpiece
Washer
(Applicable to all Sinks)
Apply a thin bead of plumber's putty to
1
the perimeter of the drain opening on the
inside of the sink.
From the bottom of the sink add the
3
rubber washer, anti-friction ring and
tighten the drain locking nut.
Rubber Washer
Anti-Friction Ring
Drain Locking Nut
From the bottom of the sink add the
5
tailpiece washer, tailpiece and
tighten with the tailpiece locking nut.
Tailpiece Washer
Tailpiece
Tailpiece Locking Nut