Installing Single Bowl Undemount Sink - NewAge Products Home Cabinet Sinks Guide D'installation

Installing Single Bowl Undemount Sink

Preparing counter top
All base cabinets must be fully installed, mounted and leveled, prior to the installation of the sink.
Refer to Kitchen Installation Guide for correct installation of cabinets. Important: NewAge supplies
the cut out template for the undermount sinks, it is up to the customer to supply the template
to the counter top supplier for cutting.
Parts and Tools required.
1 x 1 x
Counter Top
2
1
1 x Cordless
1 x Set Square
Power Drill
100 % SILICONE
1 x Caulking Gun
17
1 x Tape Measure
Pencil
1 2 3
1x Rubber Mallet
Hammer
(For Undermount Sinks)
Centre the counter top to the cabinets and
1
align with the back edge.