Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Preparing the counter top
Using a set square, mark centre line onto the counter top bottom surface with respect to
the sink cabinet as shown. Refer to diagram (A) for Inset slim-top cutting template. Place
2
the template on the centre line and trace the cut out line as shown. Refer to the template
provided with Sink and take to the countertop supplier to have it cut.
A
INSET SLIM-TOP CUTTING TEMPLATE
Actual cutout line
Back Edge
of Counter top
Front Edge
of Counter top
12
Centre line
Cutout Measurements - TOP VIEW
R 0.39" , 10mm
18.38", 467 mm
(For Overmount Sink)
Publicité
Table des Matières
