Warranty Rules - DIEL MT 200 Manuel D'instruction

ENGLISH
and the led changes again.

WARRANTY RULES

The device has a warranty period time of 3 years from test date marked on the label
and at the end of this manual.
The warranty is valid only whether damages are due to manufacturing defects or to
an incorrect calibration of the probes.
We aren't liable for damages due to a wrong wiring of probes or to a wrong power
supply voltage (for example 400 Volt AC).
At any rate we aren't liable for damages due to the bad working of the equipment.
The reparations in guarantee, except different accord among the parts, will be
carried out in our factory in Montecchio Maggiore (VI).
ATTENTION
Do not carry out dielectrical test or partial discharge on the electric machine with
the device inserted, if possible avoid connecting the device directly to the
secondary of the transformer to protect, otherwise the transient overvoltage can
damage the device.
This is always clearer if the power supply voltage of the device is 230 VAC and in
case of condensers for the remaking.
- 15 -