Blueant T1 Guide De Démarrage Rapide page 2

1
Troubleshooting Tips: English
The following are some troubleshooting tips for using the T1
with specifi c phone models.
Phonebook Transfers
When you pair your phone the T1 will attempt to transfer the
contacts from your phonebook so that it can announce the
names of incoming callers.
Note: If your phone prompts you to allow a connection to the
T1, you must select "YES" or "OK".
2
BlackBerry®
If you are using a BlackBerry smartphone you may see a
message like this one during the phonebook transfer.
Accept connection request
from BlueAnt T1?

Don't ask this again
Select "Don't ask this again" so that a tick appears in the
box, and then choose "YES".
3
Android™
On Android devices a message
about the phonebook transfer
may appear in the notifi cations
area at the top of the screen.
In order to transfer your contacts
you must swipe your fi nger over
this message and accept the
phonebook transfer request from
the T1.
4
Apple iPhone
®
On the Apple iPhone, the order in which names are read out
is determined by a setting on the phone.
If you fi nd that the caller's last name is read out fi rst
followed by the caller's fi rst name then you should go to
the "Mail, Contacts, Calendars" section in the "Settings"
menu on your phone and change both the "Sort Order" and
"Display Order" to "First, Last".
Once you have changed this setting, you must update the
phonebook on your T1. To do this, make sure your phone
is connected to the T1 but not on a call, then hold down
the MFB until the T1 announces that it is updating the
phonebook.
YES
NO
Phonebook Access Request
Notifi cation
shown on
Android
devices
®
5
Automatic Transfer Not Supported
Some phones do not support automatic phonebook
transfers. If this is the case on your phone the T1 will
announce that it cannot transfer the contacts automatically:
1. Go to your phonebook and select the contacts you want
to send to the T1. Choose the option to "Mark All" or
"Select All" if this is available on your phone (if this is
not available, you will need to transfer each contact
individually).
2. Select the option on your phone to "send" or "beam"
contacts, business cards, or v-cards via Bluetooth, and
select the T1 from the list of Bluetooth devices. See your
phone's manual for help with this step.
6
Automatic Transfer Not Supported
Some phones do not support phonebook transfers at all.
In order to transfer your phonebook to the T1, your phone
must support either the Phonebook Access Profi le (PBAP),
AT commands, or the Object Push Profi le (OPP).
If your phone does not support any of these Bluetooth
profi les, then you will not be able to copy your contacts to the
T1. When you receive a call, the T1 will read out the caller's
number instead.
7
Phone Specifi c Help
> Android: Please note that the Android Operating System
does not currently support activating voice dialing over
Bluetooth. It will not be possible to use
until this feature becomes available on Android devices.
> Apple iPhone: Please note that voice control over Bluetooth
was introduced on the Apple iPhone 3GS in fi rmware
version 3.1. Older versions of the Apple iPhone do not
support voice dialing over Bluetooth, so it will not be
possible to use Phone Commands
> BlackBerry: If you fi nd that your T1 does not reconnect to
your phone, go to the "Options" menu and ensure that the
T1 is confi gured as a "Trusted Device".
8
Help and Support
For further help, support, and tips and tricks, please see our
support knowledgebase on
Phone Commands
on these devices.
www.blueantwireless.com
Version: T1-TSG-CAEN-1.2