BoomToneDJ FROGGY LED RGBW Mode D'emploi page 9

6 channels
CH1
CH2
CH3
CH4
CH5
CH6
Attention: How to set master-slave without connecting to DMX
1. The Sound Master-slave : Link all fixtures. Don't connect the DMX Controller,
set the address to A001, choose one fixture as Master, and set the one to Sound model(so
1,so 2). Then sound master-slave mode is achieved.
2,The Auto program Master-slave : Link all fixtures. Don't connect the DMX
Controller,set address to A001, choose one as Master, and set to Auto model(de 1,de
2...de 9). Then auto master-slave mode is achieved.
- Set DMX address
Display the DMX 512 value of each channel. With this function you can display the
DMX
512 value of each channel. The display automatically shows the channel with a value
changing.
Error message
When you turn on the fixture, it will make a reset first. The display may show XXer
while
there are problems with one or more channels. XX stands for channel 1, 2, 3, etc who
has
the testing sensor for positioning. For example, when the display shows Red Er , it
means
there is some error in channel 1,If there are some errors on channel 1, channel 2,
channel
5 at the same time, you may see the error message Red Color Er , Green Er ,Pan Er
flash
Fonction
Dimmer
Strobe
Red
Green
Blue
White
Contrôle de la fonction
0-255:Dimming 0%-100%
0-255:Strobe from slow to fast
9