Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Do not attempt a current measurement when the open voltage
is above the fuse protection rating. Suspected open voltage
can be checked with voltage function.
Never attempt a voltage measurement with the test lead inserted
into the A input terminal.
Disconnect circuit power and discharge all high-voltage
capacitors before testing resistance, continuity, diodes, or
capacitance.
Symbols as marked on the Meter and Instruction
manual
Risk of electric shock
!
See instruction manual
DC measurement
AC measurement
Wireless transmission
Equipment protected by double or reinforced insulation
Application around and removal from
hazardous live conductors is permitted
Do not discard this product or throw away.
Attention! Magnets might affect the correct functioning
of cardiac pacemakers and implanted defibrillators.
As a user of such medical devices, keep a sufficient
distance to the magnet.
Unsafe Voltage
To alert you to the presence of a potentially hazardous voltage,
when the Tester detects a voltage ≧30 V or a voltage overload
(OL) in V, mV, PV. The
Maintenance
Do not attempt to repair this Meter. It contains no user
serviceable parts. Repair or servicing should only be performed
by qualified personnel.
Low battery
Fuse
Earth
Conforms to EU directives
Both direct and
alternating current
symbol is displayed.
02
EN
Publicité
Table des Matières
