Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

V4.0
4.
Do not disconnect the power cord in place of using the ON/OFF switch on
the tool. This will prevent an accidental startup when the power cord is
plugged into the power supply.
5.
Do not alter any parts of the tool or accessories. All parts and accessories are
designed with built-in safety features that may be compromised if altered.
6.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
7.
When wiring an electrically driven device, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
8.
Grounded tools must be plugged into an outlet that is properly installed and
grounded in accordance with all codes and ordinances. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded. If
the tool should electronically malfunction or break down, grounding provides a
low resistance path to carry electricity away from the user.
a.
Never remove the grounding prong or modify the plug in any way, as
this will render the tool unsafe.
b.
Do not use any adapter plugs.
WARNING! All wiring should be performed by a qualified electrician.

POWER CORD

1.
Insert the power cord plug directly to the power supply whenever possible.
Use extension cords (minimum of 1.5 m) or surge protectors only when
the tool's power cord cannot reach a power supply from the work area.
2.
Do not operate this tool if the power cord is frayed or damaged as an electric
shock or surge may occur, resulting in personal injury or property damage.
a.
Inspect the tool's power cord for cracks, fraying or other faults in the
insulation or plug before each use.
b.
Discontinue use if a power cord feels more than comfortably warm
while operating the tool.
c.
Have the power cord replaced by a qualified service technician.
3.
Keep all connections dry and off the ground to reduce the risk of electric
shock. Do not touch plug with wet hands.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
20 in. Hanging Infrared Heater
8684417
5

Publicité

Table des Matières
loading

Table des Matières