Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V4.0
2.
Attach the metal chain (A) to the anchor. The heater must be at least
6 ft (1.8 m) away from the floor and 1 ft (0.30 m) away from the ceiling.
OPERATION
CAUTION! Do NOT touch any part of a hot or operating heater aside from the
switch to prevent burn injuries.
Tug the pull switch to turn the unit on.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3.
Only use accessories intended for use with this tool.
4.
Maintain the tool's labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Wipe the surface with a clean, moist cloth. Do not use solvents.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Visit www.princessauto.com for more information
All manuals and user guides at all-guides.com
20 in. Hanging Infrared Heater
8684417
7
Publicité
Table des Matières
