Guarantee; Technical Specifications; Class Ii Equipment - Microlife BC200 Comfy Mode D'emploi

Problem Potential solutions
No breast milk is being
pumped.
Pumping the breast milk is
causing pain.
The breast milk is leaking
out underneath the silicone
cushion.
One of the device compo-
nents has become altered
or damaged.
The device will not switch
on.

6. Guarantee

This device is covered by a 2 year guarantee from the date of
purchase. During this guarantee period, at our discretion, Microlife
will repair or replace the defective product free of charge.
Opening or altering the device invalidates the guarantee.
The following items are excluded from the guarantee:
 Transport costs and risks of transport.
 Damage caused by incorrect application or non-compliance
with the instructions for use.
 Damage caused by leaking batteries.
 Damage caused by accident or misuse.
 Packaging/storage material and instructions for use.
 Regular checks and maintenance (calibration).
 Accessories and wearing parts: Batteries, pump attachment
(with membrane/valve), tubes, cushion, bottle with holder, teat
and cap, bottle adapter.
8
 Check that the silicone tube is correctly
inserted, the device is switched on and
the suction level is not set to the
minimum.
 Ensure that there is no milk remaining
in the silicone valve and obstructing
the milk flow.
 Try to relax and then attempt it again a
few minutes later. As you use the
device more and more, you will find it
easier to pump milk.
 Set the suction level to MIN.
 Consult your doctor.
 Remove the silicone cushion and re-
attach it. Ensure the silicone cushion is
correctly positioned and firmly secured
to the pump attachment.
 Lean your upper body forwards slightly.
 Do not use any corrosive, gaseous
cleaning agents or solvents.
 In some cases, marked fluctuations in
temperature can damage the plastic
on the device.
 If any of the parts becomes damaged,
stop using the device.
 Ensure that the device is correctly
assembled and switched on as
described in this instruction manual.
 Ensure that the mains part plug is
correctly connected to the device.
Should guarantee service be required, please contact the dealer
from where the product was purchased, or your local Microlife
service. You may contact your local Microlife service through our
website:
www.microlife.com/support
Compensation is limited to the value of the product. The guarantee
will be granted if the complete product is returned with the original
invoice. Repair or replacement within guarantee does not prolong
or renew the guarantee period. The legal claims and rights of
consumers are not limited by this guarantee.

7. Technical Specifications

Type: Electric Breast Pump BC 200 Comfy
Dimensions: 130 x 120 x 57 mm
Weight: 330 g (without batteries)
Maximum
suction
pressure: -0.32 bar
Operating 5 - 40 °C
conditions: 30 - 85 % relative maximum humidity
(non condensing)
700 - 1060 hPa ambient pressure
Storage -20 - +60 °C
conditions: 10 - 95 % relative maximum humidity
(non condensing)
700 - 1060 hPa ambient pressure
Power source: 4 x 1.5 V alkaline batteries; size AA
AC adapter: Input: 100-240V AC 50/60Hz 0.5A
Output: 6V DC 1.0 A
Battery lifetime: 500 hours
IP Class: IP21
Expected
service life: 500 hours
Operating
limits: 30 min. On / 30 min. Off
Useful life of accessories subject to the conditions of cleanli-

ness and conservation
Electronic compatibility in accordance with EN 60601-1-2

Safety requirements in accordance with EN 60601-1

Child use and care articles - Drinking equipment according to

EN 14350
Unit for suction of breast milk

Unit for medium vacuum and low flow

Class II equipment (safety insulation)
