Rear Panel - ION PARTY ROCKER MAX Guide D'utilisation Rapide

Light Buttons: Use these buttons to turn each color in the dome on or off–Red, Green,
8.
Blue, White, Pink, and Orange.
9. Echo: Use this knob to add or remove an echo effect to the Microphone Inputs.
Master Volume Control: This adjusts the speaker's main mix volume, which includes
10.
Microphone Inputs, Auxiliary Input, and the audio of a paired Bluetooth device.

Rear Panel

1. Power On/Off Switch: Turns Party Rocker Max on or off.
2. Power Cable Input (IEC): Insert the included power cable here to
power the unit.
3. Fuse: If the unit's fuse is broken, lift this tab to replace the fuse.
Replace it with a fuse with an appropriate rating. Using a fuse with an
incorrect rating can damage the unit and/or fuse.
Connecting with a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Party Rocker Max and it will automatically go into pairing mode to search for
Bluetooth devices. You will know you are in pairing mode when the Bluetooth LED is off.
3. If your Bluetooth device is not able to pair to Party Rocker Max, press the Bluetooth
Disconnect button on the unit to break previous Bluetooth connections and reset the
Bluetooth module.
4. Navigate to your Bluetooth device's setup screen, find Party Rocker Max and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
5. Bluetooth LED will light up solid when it is "paired."
Note: If you experience trouble pairing or playing music, update your device's OS.
6. To disconnect pairing, press the Bluetooth Disconnect button on Party Rocker Max.
7. To connect to another Bluetooth device, repeat steps 3-4.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source or musical
instrument. Also, try to reduce the overall volume of Party Rocker Max.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower
the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably
feedback. Point the microphone away from the speaker.
If you can't hear the microphone over the music volume: Turn down the music volume
from your source.
6
POWER
1
ON OFF
AC IN
2 3