auna Graceland Touch Mode D'emploi page 42

EN
42
• When you set the „HOLD" mode, the LEDs only light up in one color.
When you switch to „PLAY" mode, several colors are displayed in
sequence.
• When you return to the HOLD mode, you can select any color to be
displayed permanently (note that these colors must be set, so it may
not be the same color that was displayed when the unit was put in the
HOLD mode).
• If you want to turn off the light effects, press the LIGHT button again.
Note: In „HOLD" mode, it may happen that no light is visible (in this
case, the switch must be adjusted).