Playback Setup; Software Update - Sharp DR-I470 Mode D'emploi

• (Threshold is to set to the auto-switching between mono and stereo
modes. When in a week reception place, the system will switch to the
mono mode automatically to reduce the background noise of the
station, so that to be more clearly listening.)
Local Radio Setup
Manually set up your location for Local radio rather than allowing the radio
to Auto Detect.

Playback Setup

Select the playback mode of the Media Center: Off , Repeat All, Repeat one,
Shuffl e.
Device
Default name for DLAN is "AirMusic". You can rename the device for DLAN
setup.
Key
In this setting interface, you can select "Alarm", "Dimmer", "Equaliser",
"Local Radio", "Mode", "Preset", "Sleep Timer" and "Timer" to confi rm
the function of the MODE button on the front panel and the remote
control.
Equaliser
Default EQ is normal. You may change it to Flat, Jazz, Rock, Soundtracks,
Classical, Pop, News or my EQ.
Resume when power on
Turn on the function for the radio to resume when powered on. Instead,
the screen will remain in main menu.

Software Update

Will show here if a software update is available for the radio. If one is
available, please select for the update to initiate.
Reset to Default
Select this option to reset your radio and revert all of the settings and
presets made. Confi rm that you would like to reset the unit and its settings
by selecting "YES".
Troubleshooting
This product does not contain any parts that are serviceable by the user. In
case of a fault, contact the manufacturer or authorised service department.
Exposing the internal parts inside the device may endanger your life. The
manufacturers guarantee does not extend to faults caused by repairs
carried out by unauthorised third parties.
No Sound
Cause
• Volume not turned up.
Solution
• Adjust the main volume knob.
No sound from Bluetooth connection
Solution
• Check whether external device requires password"0000" to start with.
WiFi not connecting
Solution
• Ensure WIFI mode is selected in settings and the correct passcode is
being entered for the WIFI modem.
Static Sound
Cause
• Signal reception too low.
Solution
• Adjust the antenna or move the unit to a stronger signal location.
Sound is distorted
Cause
• Volume is too high
Solution
• Reduce the volume
Desired station not found
Cause
• Weak signal
Solution
• Use the Manual Tune function.
NO DAB functions
Cause
• No DAB coverage in your area.
• Poor reception
Solution
• Adjust the position of the aerial.
The display is blank.
Cause
• This may occur if the broadcaster changes the label of a service or
removes a label while tuned.
Solution
• The radio will try to retune.
• Perform a scan.
NO Power
Cause
• The adaptor is not connected to the wall outlet.
Solution
• Make sure the adaptor is plugged.
EN
7