Sharp DR-I470 Mode D'emploi page 8

• Select this option to search for the WIFI connection. Whilst this has
been selected you will have 120 seconds to click the WPS button on
your WIFI modem. This will connect your WIFI to your radio without
manually writing in the passcode.
• Manual Confi guration
• You can manually set the wireless data: DHCP, Enter SSID and Manage.
• Check Network when Power On
• Set it Enable or Disable.
Date & Time
• Set Date and Time
• Manual Setup or Auto Detect
There is the option to manually set the time and date instead of using
auto-detect to set this up. Rotate the Select Knob or press the digit
buttons to input your desired digit of the month. Once you have
got the correct digit, click RIGHT button to go to the day setting.
Continues this process with the year, the hour and the minutes. Once
the manual set up is complete, press down the OK button to enter. To
cancel the format of the date and time, you can alter these settings
under the "Date & Time" function.
• Set Time Format: To set the time format, 12Hour or 24 Hour.
• Set Date Format: YYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY
Alarm
• Setting Alarm 1/ Alarm 2
• To set an alarm on your radio, go to "Confi guration" settings and
scroll through to select "Alarm" or click ALARM button on the remote
directly.
• After entering the Alarm setting screen, select "Alarm 1(Turn Off )" or
" Alarm 2(Turn Off )" and choose "Turn On" to activate the alarm.
• Select "Repeat" to choose the regularity of your alarm by pressing
down the OK button. You can choose between Everyday, Once or
select individual days for the alarm to sound. Once you have made
your selection, press the LEFT button to go back to the other alarm
settings.
• Select "Time" and turn the Select Knob to highlight the alarm hour.
Once you have found the desired hours, press RIGHT button to
change the minutes.
• Once the minutes are at the correct value, press RIGHT button to
change "AM" or "PM",then press the OK button to confi rm and go
back to alarm settings.
• Now scroll down and select "Sound" by pressing OK button. You can
now choose between Beep, melody, Internet Radio, FM, or DAB/DAB+.
• If you are setting your alarm sound as Internet Radio, FM or DAB/DAB+
then you will now be taken through your preset favourite stations.
Select your chosen alarm station by pressing down the OK button.
• The alarm symbol will show on the main display screen.
• How to cancel your alarm
• To cancel your alarm, select "Alarm" in Confi guration settings or with
the ALARM button and select the alarm you wish to turn off .
• Once the alarm is selected, you will have the option to turn off or on.
Highlight the "Turn Off option and press the OK button to confi rm.
NOTE: Change the alarm volume by going to " Alarm
Volume" setting in the Alarm setting screen.
• How to turn off your alarm when sounding
When your alarm is sounding, press the ALARM or STANDBY button on
the remote control to stop the alarm . If you have set an alarm to sound
everyday or more than once, the alarm icon will still remain on display
screen.
• How to put your alarm on SNOOZE
When your alarm is sounding, press any button except STANDBY or
ALARM to stop the sound and put into SNOOZE mode. The SNOOZE
function will make the radio sound again after 5 minutes.
NOTE: Stop the SNOOZE alarm by pressing the ALARM or STANDBY button.
• Nap Alarm
• After selecting the "Alarm" option in Confi guration settings, or the
ALARM button on the remote control to select the "NAP Alarm(Turn
Off )".
• Choose how many minutes you would like to have the nap alarm on
with the option of : Turn Off , 5 Minutes, 10 Minutes, 20 Minutes, 30
Minutes,60 Minutes, 90 Minutes, 120 Minutes.
• Alarm Volume
• Change the alarm volume by rotating the Volume Knob or the LEFT /
RIGHT buttons to change.
• Once the correct sound volume has been chosen, press the OK button
to confi rm.
Timer
• In "Confi guration" settings, select the option for "Timer" and a screen
with 00:00 will display.
• To go up in seconds, click the RIGHT button. To go down in seconds,
click the LEFT button. Press and hold the LEFT/RIGHT buttons to move
through the timer quickly.
• Once you have chosen the correct timer amount, confi rm it by pressing
the OK button.
Language
Select your chosen language within the list.
Dimmer
• To set the brightness of your radio, go to "Confi guration" settings and
select "Dimmer" . You can choose "Power Saving" or "Turn on" mode.
• Select "Power Saving" mode to change one of your brightness levels
with the choice of up to 20 levels. When there is no activity of the radio
for 15 seconds, this lower brightness level will set until a button is clicked
and the "Turn On" setting will activate.
• Select "Turn On" mode to be the brightness for when the radio is active
and in use.
• Alternatively, you can alter two brightness settings by pressing DIMMER
button on the remote control on front panel directly.
Display
Choose the display to be Color or Monochrome.
Power Management
Select this to confi gure the radio to go into Standby mode automatically
after a set time of inactivity or if there is no WIFI signal. You can select
5/15/30 minutes to go into Standby mode, or you can select "Turn Off " to
ignore this function.
Sleep Timer
• To set a sleep timer, go to "Confi guration" settings and select "Sleep
Timer", You can choose Turn Off , 15, 30, 60, 90, 120, 150, 180 minutes.
• Alternatively, you can repeatedly press the SLEEP button on the remote
control to switch between sleep times on the top right of the display
screen. There is an option between 15, 30, 60, 90, 120, 150, 180
minutes.
• Once Sleep Timer has been selected, the timer amount and a sleep
image will show on the top right of the display screen.
Buff er
Confi gure the buff er time of the music playback: 2 /4 /8 seconds.
Weather
• Set location: Choose and enter your location.
• Temperature Unit: Choose your preferred temperature "Celsius" or
"Fahrenheit".
• Show on Standby: Choose "Off " or "On" to deactivate or activate the
weather forecast display on the standby screen. When you activate the
weather forecast display , it will display on the Standby screen every 10
seconds.
FM Setup
• Mode: You can set "Mono" or "Stereo" mode.
• Threshold: Select threshold settings (seek threshold/Stereo threshold).