V- Reset Values (User's Level); Vi- Keypad Short Cuts - Cetetherm Micro 2000 Manuel

V- RESET VALUES (USER'S LEVEL)

All the previous set values are stored in flash RAM. Even if you plug off the whole
unit, these parameters will remain.
If user gets lost changing too many parameters, pressing RESET key (rep. 8) will
restore the values you defined in the factory menu.
When you press RESET key,
display looks like this:
Press +/- to confirm/cancel
VI- KEYBOARD SHORTCUTS
The controller is equipped with quick functions activated with some keys
combinations:
KEY SEQUENCES / DISPLAY
* As per equipment.
Plus
Shows S2 value if connected
Shows set point value when standard display
shows measured temperature,
Shows
standard display shows set point value.
Switches from Normal mode to Reduced
mode.
No effect when Reduced mode active.
Switches from Reduced mode to Normal
mode.
No effect when Normal mode active.
Enables to reset an alarm condition when
displayed. i.e. High temperature alarm.
Shows S3 value if connected*
Shows set point value when standard display
shows measured temperature,
Shows
standard display shows set point value.
For 3 seconds to access factory menu
Safety function, to activate 4 relays
together. Press white left and right
arrow keys (rep 1 & 2)
Page 17 / 24
Description
measured temperatures
measured temperatures
when
when