Ecler NUO4.0 Manuel Utilisateur page 9

8. Listen to the signal with your headphones
Press the PFL button (7) on channel 1. Adjust the LEVEL controller (29) to obtain a comfortable monitoring volume.
Now you should hear music with your headphones. Turn the SELECT controller (28) to the right to crossfade the
PFL signal and the MIX signal. When this controller is completely turned to the right, only the MIX signal will be
monitored.
9. Try the operation of the tone controllers
Experiment with this powerful 3-way stereo equaliser (4, 5, 6). This tone control has been designed for a creative
sound edition: each way can be individually isolated using the big and ergonomic rotary controllers.
10. Verify the crossfader settings.
Each channel can be assigned to the crossfader using the A/OFF/B
switch (10). The crossfader allows melting the signals assigned to its
sides. If the switch is in position A or B, the channel is assigned to one
or the other side of the crossfader. The OFF position disables the
crossfader function for this channel.
11. Adjust the crossfader curve
The XFADER SHAPE control (19) allows you to precisely adjust the
skew angle of the crossfader's curve. Turning the controller completely
to the left, the two songs will be melt softly. The crossfader's curve
raises when turning the controller to the right. Moving the controller
completely to the right, the signal will enter suddenly with just a short
movement of the crossfader, which is a very suitable feature for
scratching techniques.
9