Parrot ASTEROID Tablet Guide D'utilisation Rapide page 21

different from the ones displayed on your music
files titles.
iPod
1. Connect your iPod to the iPod cable.
2. Press the SOURCE button on the remote
control (or tap Player on the screen) and
select iPod. You can also tap
brow se through the content of your iPod.
3. Tap track to start playback.
Note : Tap to adjust several settings (audio,
repeat, random).
SD card
You can use the follow ing SD cards (w ith
adapter if necessary) w ith the Parrot ASTEROID
Tablet : SD, micro SD , mini SD, SDHC, mini
SDHC, micro SDHC. The SD card capacity must
not exceed 32Gb.
Only MP3 (Mpeg 1 Layer3), AAC or WMA
formats are supported.
1. Insert the SD card into the appropriate slot
located on the right of the screen, w ith the
contact surface facing you (diagram G
p.11).
2. Press the SOURCE button on the remote
control (or tap
select SD. You can also tap
brow se through the content of your SD
card.
3. Tap track to start playback.
Note : Tap to adjust several settings (audio,
Brow se to
repeat, random).
USB storage device
The Parrot ASTEROID Tablet is compatible w ith
the majority of USB keys / MP3 audio player /
external hard drive. There is no restriction in
terms of capacity of USB keys.
Only MP3 (Mpeg 1 Layer3), AAC or WMA
formats are supported.
1. Connect your USB device to the USB cable.
2. Press the SOURCE button on the remote
control (or tap
select USB. You can also tap
brow se through the content of your USB
storage device.
3. Tap track to start playback.
Note : Tap to adjust several settings (audio,
repeat, random).
Audio player connected via Bluetooth
Player on the screen) and
Note: The Parrot ASTEROID Tablet allows you to use
Brow se to
the telephone and audio streaming functions from
2 different phones without having to disconnect
one of them.
You can use the Parrot ASTEROID Tablet to
listen to songs stored on your mobile phone or
Bluetooth audio device. To do so, your phone /
audio device must support the Bluetooth A2DP
profile (Advanced Audio Distribution Profile). If
you are using a Bluetooth audio player for the
first time, you have to pair both devices. If both
devices are already paired:
Player on the screen) and
Car radio
Brow se to
To get back to your car radio audio output,
press the SOURCE button on the remote control
(or tap
radio.
1. Press the SOURCE button on the remote
control (or tap Player on the screen) and
select Bluetooth Audio.
2. Start playback on your Bluetooth audio
player.
Music on the screen) and select Car
English 21 21
English 21