Before Installation - Smeg AG820BC4 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com

Before Installation

Remove all packing material and accessories. Examine the oven for any damage such as dents or
broken door. Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not
remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron.
1. Select a level surface that provides enough open space for the intake and/or outlet vents.
(7.5cm) is required between the oven and any adjacent walls. One side must be open.
3.0 inch(7.5cm)
3.0 inch(7.5cm)
a. Leave a minimum clearance of 12 inches (30cm) above the oven.
b. Do not remove the legs from the
c. Blocking the intake and/or outlet openings can damage the oven.
d. Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interferenceto your radio or TV reception.
2. Plug your oven into a standard household outlet. Be sure the voltage and the frequency is
the same as the voltage andthe frequency on the rating label.
WARNING: Do not install oven over a range cooktop or other heat-producing appliance.
If installed near or over a heat source, the oven could be damaged and the warranty
would be void.
EN
Installation
12 inch(30cm)
OPEN
bottom of the oven.
EN-8

Publicité

Table des Matières
loading

Table des Matières