Commissioning And Operation - oneConcept SG003 Mode D'emploi

COMMISSIONING AND OPERATION

Getting Started
1. The socket must be earthed.
2. Position the drain hose to allow the water to drain off easily.
3. Plug the power plug into the mains socket.
4. Connect the water supply: Insert the hose into the opening provided until
you hear a click.
Overview washing process
1
Washing
Washing instructions:
1. Fill with water: Fill with water to the desired level.
2. Fill in detergent: Select the desired/required washing time.
3. Load laundry: Load the laundry. Decrease the amount of water if
necessary.
4. Adjust the water flow: Adjust the water flow appropriately.
5. After washing: Drain the water.
Note: If the water level is too high, the water will slosh out of the drum.
To avoid deformation of clothes, fold them and close zips (e.g. on trousers).
Prepare the clothes as shown in the picture. All pockets must be emptied.
Remove coins, nails, etc. Fur trim or other ornaments must be pulled inside
out. Bold colours should be washed individually.
2
Pump out half
3
Rinsing
EN
13