General Information; Important Safety - Talon Tools AC2122F4 Guide D'utilisation

SPECIFICATIONS
Model No. . . . . . . . . . . . . . . . . . . . . . . .AC2122F4 . . . . . . . . . . . .AC2122F6 . . . . . . . . . . . . . .AC2122F8
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230/240V~, 50Hz, 2000W . .230/240V~, 50Hz, 2000W . . . .230/240V~, 50Hz, 2000W
No Load Speed . . . . . . . . . . . . . . . . . . . . . . . .6,000/min . . . . . . . . . . . . . .6,000/min . . . . . . . . . . . . . . . . .6,000/min
Cutting Speed . . . . . . . . . . . . . . . . . . . . . . . . .> 12 m/sec . . . . . . . . . . . . .> 12 m/sec . . . . . . . . . . . . . . . .> 12 m/sec
Maximum cutting legnths . . . . . . . . . . . . . . . .325mm . . . . . . . . . . . . . . . .375mm . . . . . . . . . . . . . . . . . .425mm
Maximum length of the guide bar . . . . . . . . . .350mm . . . . . . . . . . . . . . . .400mm . . . . . . . . . . . . . . . . . .450mm
Net Weight (Without guide bar and chain) . . .4.5 kg . . . . . . . . . . . . . . . . .4.5 kg . . . . . . . . . . . . . . . . . . . .4.5 kg
Oil Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . .180ml . . . . . . . . . . . . . . . . .180ml . . . . . . . . . . . . . . . . . . . .180ml
Braking Time . . . . . . . . . . . . . . . . . . . . . . . . . .< 0.10s . . . . . . . . . . . . . . . .< 0.10s . . . . . . . . . . . . . . . . . . .< 0.10s
Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.45 m/s
2
Sound Power Level . . . . . . . . . . . . . . . . . . . . .109 dB(A) . . . . . . . . . . . . . .110 dB(A) . . . . . . . . . . . . . . . . .110 dB(A)

IMPORTANT SAFETY

• HOW TO READ SYMBOLS AND COLORS
(FIG. 1)
WARNING: RED Used to warn that an
unsafe procedure should not be performed.
GREEN RECOMMENDED
Recommended cutting procedure.
Fig. 1
WARNING
1. Do not attempt to hold saw with one hand.
2. Beware of kick back.
3. Avoid bar nose contact.
RECOMMENDED
4. Hold Saw properly with both hands.
• DANGER! BEWARE OF KICKBACK!
WARNING: Kickback can lead to dangerous
loss of control of the chain saw and result in
serious or fatal injury to the saw operator or to
anyone standing close by. Always be alert
because rotational kickback and pinch kickback
are major chain saw operational dangers and
the leading cause of most accidents.
. . . . . . . . . . . . . . .4.77 m/s 2 . . . . . . . . . . . . . . . . .4.77 m/s
A B
A
A
Fig. 2A
BEWARE OF:
ROTATIONAL KICK- THE PUSH (PINCH
BACK KICKBACK) AND PULL
(Fig. 2A) REACTIONS (Fig. 2B)
A = Pull
A = Kickback path B = Solid objects
B = Kickback reaction C = Push
zone
KICKBACK may occur when the NOSE or TIP of the guide
bar touches an object, or when wood closes in and pinch-
es the saw chain in the cut.
Tip contact in some cases may cause a lightning-fast
reverse reaction, kicking the guide bar up and back toward
the operator.
PINCHING the saw chain along the BOTTOM of the guide
bar may PULL the saw forward, away from the operator.
PINCHING the saw chain along the TOP of the guide bar
may PUSH the guide bar rapidly back toward the operator.
Any of these reactions may cause you to lose control of
the saw, which could result in serious personal injury.
3
GB
16
13
2
A
B
B
C
Fig. 2B
1. Rear Handle
2. Oil Tank Cap
3. Trigger Start
4. Sprocket cover
5. Chain Cover Control Knob
6. Chain Tension Ring
7. Electric Motor
• SAFETY FEATURES
Numbers preceding the descriptions correspond with the numbers on preceding page to help you locate the safety fea-
ture.
3 TRIGGER START / STOP SWITCH stops saw motor when released.
9 CHAIN BRAKE LEVER / HAND GUARD activates the chain brake and protects the operator's left hand in the
event it slips off the front handle while saw is running.
7 ELECTRIC MOTOR is double insulated for added safety.
10 LOCK / OFF BUTTON prevents accidental acceleration of the saw motor. The trigger cannot be squeezed unless
lock/off button is pushed forward to end.
13 LOW-KICKBACK CHAIN helps significantly reduce kickback, or the intensity of kickback, due to specially designed
depth gauges and Guard links.
19 CHAIN CATCHER reduces the danger of injury in the event saw chain breaks or derails during operation. The
catcher is designed to intercept a whipping chain.

GENERAL INFORMATION

9
14
2
3
5
4
19
6
17
8. Electric Cord
9. Chain Brake Lever / Hand Guard
10. Lock / Button
11. Front Handle
12. Guide Bar
13. Saw Chain
14. Spiked Bumper
4
GB
11
10
1
18
15
7
8
12
15. Rear hand Guard
16. Guide Bar Nose
17. Oil Tank Inspection Slot
18. Cord Retainer
19. Chain Catcher