Transporting; Filling The Tank - CEMO DT-Mobil Easy 980l Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

GB
5.2 Loading...
5.2.1 ...by hand
An empty DT-Mobil
Easy can be loaded
by hand using the
grip hollows on the
side of the tank. When
doing so, observe the
weights of the empty
equipment:
95 kg - 143 kg
5.2.2 ... with forklift
i
Important!
Use the
moulded
recesses on
the underside
for safe lifting
with a forklift.
5.2.3 ... with crane
Danger!
A DT­Mobil Easy can cause severe
injuries if it falls.
Before each crane operation, the
screw fastenings of the 4 brackets must be
checked for a correct and secure
connection.
Do not stand under suspended loads during
crane operations.
• fold up the 4 brackets i fixed to the side
of the tank.
• attach 4 load handling devices to them.
• load/unload the DT-Mobil Easy onto/from the
transport vehicle.
i
Important!
Each load handling device (rope, belt,
chain) must be of the same length.
Important!
i
The lid must be closed and completely
locked with the two locks l.
34
Fig. 5.2.1: Grip hollow
Fig. 5.2.2: Forklift
12
9

5.3 Transporting

During transport, observe the pertinent regulations
for transport and securing loads, in particular:
• road-traffic (licensing) regulations of the
respective country,
• CEN 12195 Parts 1 to 4 for calculation and lashing
For fastening on the transport vehicle by means
of suitable tension belts, use the 4 crane loops i
9
Fig. 5.3.1: Crane loops
(folded down)
i
Important!
Positive fit before traction!
First, try to positively load the equipment
(e.g. through striking the sides).
Excessive lashing forces can deform the tank
and thus damage it.
Recommendation:
Use a non-slip mat.

5.4 Filling the tank

1. Unscrew the cap on the filling opening (item 1).
2. Fill the container through the filling opening using
a delivery nozzle with automatic shut-off feature.
3. After filling, close the filling open tightly again
with the cap (item 1).
4. Contamination of the container caused by the
filling process must be removed immediately
with a dry cloth.
Fig. 5.2.3:
Lid lock
9
Fig. 5.3.2: Crane loops
(folded up)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dt-mobil easy 980 premiumDt-mobil easy combi 850/100

Table des Matières