Remote Control - Technics SL-C700 Manuel D'utilisation

Remote control


8
(8)
supplied with the SU-C700/ST-C700
(









Use the remote control supplied with the SU-C700/ST-C700
to control this unit.
For information on the operations of the SU-C700/ST-C700,
please also refer to their operating instructions.
1 [CD Í]: Standby/on switch
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
≥ The remote control does not operate when the power switch
lever is in the lowered position.
2 [AMP]/[NWP]/[CD]: Select the device to be operated
3 [DIMMER]: Adjust the brightness of the display, etc.
( 14)
4 [INFO]: View content information
5 [3, 4, 2, 1]/[OK]: Selection/OK
6 [RETURN]: Return to the previous display
7 [MENU]: Enter menu (
8 [RE-MASTER]: Turn on/off Re-master (
9 Basic playback control buttons
: Numeric buttons, etc.
≥ To select a 2-digit number
Example:
16: [S10] > [1] > [6]
≥ To select a 3-digit number
Example:
124: [S10] > [S10] > [1] > [2] > [4]
≥ [CLEAR]: Clear the entered value.
)
13, 14, 15, 16, 17)
15)