Program Playback - Technics SL-C700 Manuel D'utilisation

Viewing information such as
the remaining playback time
≥ Only available from the SU-C700/ST-C700 remote control:
1
Press [CD].
2
Press [INFO] while playing back or paused
The information displayed changes each time you press the
button.
For CD-DA:
The display changes as follows; elapsed play time of the
track, remaining time for the track, and remaining time on the
entire disc (or entire program).
For MP3/WMA:
The display changes as follows; file name, folder name, title
name, artist name, album name, format, etc.
12
(12)

Program playback

This function allows you to program up to 25 tracks.
≥ Only available from the SU-C700/ST-C700 remote control:
1
Press [PGM] in the stop mode.
≥ "PGM" screen will be displayed.
.
2
Select tracks
For CD-DA:
Press the numeric buttons
For MP3/WMA:
Select folders/files (
≥ Repeat this step to make further selections.
3
Press [1/;] to start playback.
Operations on the remote control
Stop
Check the
programmed
order
Add tracks
Clear the last
track
Cancel
program mode
≥ The program memory will be cleared:
– When the disc tray is opened.
– When the unit is turned to standby or off mode.
– When the auto off function (
≥ Program play settings are not possible while playing back a CD.
≥ Random repeat playback is not possible during program playback.
≥ You can also cancel program mode by operating the touch panel
on this unit.
1 Touch [MENU] repeatedly to select "Play Mode".
2 Touch [:, 9] to select the item and then touch [1/;].
13)
Press [∫].
≥ Programmed content is maintained.
Press [6] or [5] in the stop mode.
Do steps 2 through 3 in the stop mode.
Press [CLEAR] in the stop mode.
≥ It is not possible to select and clear the
desired programmed track.
Press [PGM] in the stop mode.
"PGM" disappears.
(Programmed content is maintained)
14) works.