Cleaning The Microscope; Disposal - AnMo Electronics Dino-Lite Mode D'emploi

14 CLEANING THE MICROSCOPE

It is very important to avoid touching the lens of the microscope because it is very delicate.
The lenses should be cleaned regularly, as particles of dust on them could have a
negative impact on image quality.
For this reason, it is recommended to protect the microscope with its protective casing
when not in use.
Avoid using any other objects or liquids that could easily scratch or damage the surface of
the lens or the sensor.
To clean the body of the microscope use a slightly dampened soft cloth.
The product is designed to last a lifetime, and is resistant to most chemicals products
except ketones MEK, solvents and substances used to remove the smalt.
Do not use abrasive materials to clean the lens, it could cause permanent
damage to it

15 DISPOSAL

The crossed waste bin indicates that the product at the end of its useful life must be
collected separately from other waste.
It must be disposed of in accordance with local WEEE regulations.
18