AquaPur AFR 3 D1 Instructions D'utilisation Et Consignes De Sécurité page 16

Switch the product on by sliding the ON / OFF
switch
1
part using repeated, light, circular movements over
8
the surface of the item of clothing . We recommend
that you start working at speed level "1" . If the results
are satisfactory and you feel comfortable handling the
product then you can switch up to speed level "2" .
Always make sure not to apply pressure . In that way
lint and knots are shaven off and are kept in the fluff
container
Switch the product off by sliding the ON / OFF
switch
1
Note: The product will shut off automatically when
screwing off the gliding part
˜ Removing / replacing the adjustable
spacer (Fig. D)
To attach the adjustable spacer
gliding part
Note: Ensure that the small tab on the product grip into
the recess on the adjustable spacer
To remove the adjustable spacer
and off .
To protect the gliding part
adjustable spacer
place the protective cap
14 GB/IE/NI
into required speed level . Guide the gliding
.
5
into position "0" .
and press it firmly .
8
when not using the product and
7
.
8
, place it on the
7
.
7
, pull it forwards
7
, you should remove the
8
on the gliding part
6
.
8