Uberhaus 22275000 Guide De L'utilisateur page 10

OPERATION
Controls
 Electronic Buttons
Control Panel Layout and Buttons Configurations:
Electronic Controls with Time Delay
• Lights:
o Press the light button
• Power settings:
o Press the
o Press the
o Press the
o Press the
off).
• Timer function:
o The control system provides the option to run the motor for a predetermined time period in
order to evacuate remaining vapours from me kitchen,
o Press the
automatically after 10 minutes
HALOGEN BULBS
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY AT THE MAIN PANEL BEFORE
CARRYING OUT ANY OPERATION ON THE APPLIANCE.
To change the bulbs
1 Use a screwdriver to pull out shade and the glass.
CAUTION: BULB MAY BE HOT,PLEASE TAKE OUT
THE BULB WHEN THE BULB IS COMPLETELY
COOL!
2 Replace with a 12Volt, 20Watt max, G-4 base bulb. Do
not touch replacement bulb with bare hands!
3 Install the glass and shade back in place after replacing
the bulb.
10
to turn halogen lights on and off.
button once and the motor starts to operate at Low speed
button again and the motor will reach Medium speed.
button once more and the motor will reach High speed.
button to lower speeds in succession until the motor stops working (power
(timer) button while the motor is running. The motor will shut off