Electrical Connection - Blyss EL1716B Mode D'emploi

Installation
IMPORTANT : Please follow the safety advice set out on pages 3 to 5.

ELECTRICAL CONNECTION

- Before connecting the appliance, be sure that the
mains voltage available matches that specified on the
rating plate.
PLUG REPLACEMENT
This appliance is supplied with a BS1363 3 pin plug fitted with a 13 Amp
fuse. Should the fuse require replacement, it must be replaced with a fuse
rated at 13 Amp and approved to BS1362. In the event the mains plug has to
be removed/replaced for any reason, please note :
IMPORTANT : The wires in the mains lead
are coloured in accordance with the following
code :
Blue – Neutral
Brown – Live
Yellow-Green – Earth
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows.
The blue wire must be connected to the termi-
nal marked with an N or coloured black.
The brown wire must be connected to the terminal marked with an L or
coloured red.
The yellow-green wire must be connected to the terminal marked with an E
or coloured yellow-green.
NOTE : If a moulded plug is fitted and has to be removed take great care
in disposing of the plug and severed cable, it must be destroyed to prevent
engaging into a socket.
BLUE
Neutral
N
23
YELLOW-GREEN
Earth
BROWN
Live
L
E
FUSE
13 Amp
Cord
Clamp