Technical Specifications - cecotec Fast&Furious 4020 Force Manuel D'instructions

ENGLISH
6. TROUBLESHOOTING
Problem
The steamer does not heat up.
The steamer does not produce steam.
Water leaks from the water tank.
The steamer is producing smoke and a loud
humming sound.
The steamer does not remove creases
correctly.
Unsure when to use the clothes brush.
Metal accessories on garment are
discolouring.

7. TECHNICAL SPECIFICATIONS

Product reference: 05517
Producto: Fast&Furious 4020 Force
1400 W, 220-240 V, 50/60 Hz
Made in China | Designed in Spain
FAST&FURIOUS 4020 FORCE
28
Possible solution
Check main plug is inserted correctly.
Check the power supply.
Check the power button.
Check the water level and the water tank inlet
cover is properly covered.
Press the steam push button harder.
Hold the steamer in an upright position.
Make sure water does not exceed the MAX.
mark.
Make sure water tank inlet cover is properly
closed.
Always use the steamer in an upright position.
Check water level and refill the water tank.
Hold the steamer in an upright position and
stretch the fabric downward to ensure best
results.
When steaming delicate fabric, such as silk
to reduce the risk of water dripping onto the
garment while steaming.
Do not steam directly over the metal
accessories.
Use caution and steam around the metal
accessories.