Assembly & Use Of The Nutri Ninja ® Cup - Ninja BL660W Guide Du Propriétaire

Assembly & Use of the Pitcher - cont.
USE
Fig. 6 Fig. 7
10 Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
11 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Stacked Blade Assembly to stop turning.
(Fig. 7)
12 To remove the lid, pull the lid handle up to a 90° angle.
Turn the blender pitcher counter-clockwise to lift off the
base. (Fig. 7, Fig. 8)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
11 1-877-646-5288
REMOVAL
Fig. 8
13 Open the pour spout cap and use the spout to empty
liquid contents.
14 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher.
15 Make sure that the unit is unplugged when not in use.
MAXIMUM CAPACITY
72-oz Pitcher
Dry - Do not exceed 2 1/2 cups (20 oz.)
Wet - Do not exceed 9 cups (72 oz.)
Assembly & Use of the Nutri Ninja
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose
a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1 Fig. 2 Fig. 3
For best results, use short "PULSES"... Practice makes perfect!!
1 Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Add ingredients to the Nutri Ninja cup.
4 Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until you have a good seal. (Fig. 1)
5 Turn the Nutri Ninja cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2)
6 Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
Cup
®
USE REMOVAL
Fig. 4 Fig. 5
7 When you have reached your desired consistency,
stop the appliance by removing your hand from the
Single Serve button. To remove the Nutri Ninja cup turn
it counter-clockwise (Fig. 4) and pull straight up to
remove. (Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max" fill line.
8 Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting the blade assembly to the left.
9 Place the To-Go lid onto the Nutri Ninja cup, twist to
seal and enjoy!
10 Make sure that the motor base is unplugged when not
in use.
ninjakitchen.com
EN
12