Energy Saving Tips; What To Do If; Correcting Malfunctions - Electrolux SANTO Notice D'utilisation

Masquer les pouces Voir aussi pour SANTO:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Energy Saving Tips

• Do not install the appliance near boilers, radiators or other sources
of heat. High ambient temperatures cause longer, more frequent
operation of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to
cool first.
• Only leave door open as long as necessary.
• Do not set temperature any colder than necessary.

What to do if ...

Correcting Malfunctions

A malfunction may be caused by only a minor fault that you can recti-
fy yourself using the following instructions. Do not perform any other
work on the appliance if the following information does not provide
assistance in your specific case.
Important! Repairs to refrigerators/freezers may only be performed by
competent service engineers. Improper repairs can give rise to signifi-
cant hazards for the user. If your appliance needs repairing, please
contact your specialist dealer or our local Customer Service.
Symptom
Appliance does not work.
Appliance cools too much.
Possible Cause
Appliance is not switched
on.
Mains plug is not plugged
in or is loose.
Fuse has blown or is
defective
Socket is defective.
Temperature is set too
cold.
Remedy
Switch on the appliance.
Insert mains plug.
Check fuse, replace if nec-
essary.
Mains malfunctions are to
be corrected by an
electrician.
Turn the temperature
regulator to a warmer set-
ting temporarily.
37

Publicité

Table des Matières
loading

Table des Matières