Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10. Remove bottom panel - Use flathead screwdriver to remove (2) screws to gain access then remove plastic panel, see Figure 2.
TRIM AREA
CL
1.50"
11. Reinstall the fascia, plastic sensor piece, wiring harness, underbody appearance panel, fasteners, wheel liners and taillights removed in Step 1-6.
©2022 Horizon Global™ Corp - Printed in Mexico
Sheet 6 of 18
25005NP
3-4-22
Rev. A
Publicité
Table des Matières
