Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. Place the material to be laminated inside the laminating pouch. For an
optimal lamination result, leave an all-round spacing of 3 to 5 mm from the
edges of the pouch.
If the material to be laminated is not in a standard paper format, also
place an insert inside the laminating pouch that corresponds with the
paper format of the laminating pouch. Place the material to be lami-
nated at the front edge of the closed end of the laminating pouch.
C
! Danger of burns due to hot machine surface! During hot
AUTION
laminating, the machine surface heats up. Do not touch the machine
ing until the machine has cooled down before you touch it.
7.
straight, into the infeed of the laminator. The laminator automatically draws
in the laminating pouch and delivers it on the output side. The pouch is
very hot and soft when ejected following lamination.
22
L
AMINIERGERÄT
3 - 5 mm
A2250 / A3250
Publicité
Table des Matières
