Sauder Costa 419956 Mode D'emploi page 14

Step 9
First, fi ll two holes in the LEFT UPRIGHT (E) 1/4 to 1/2 full with GLUE (54M). Then,
å
insert two WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
NOTE: Be sure to position the parts exactly as shown and use the correct holes.
å
Now, fi ll the holes in the LEGS (H and Q) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the LEGS (H and Q) to the LEFT UPRIGHT (E). Tighten six HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the LEFT UPRIGHT insert into the LEGS.
å
Wipe away the excess GLUE.
These surfaces
should be even.
Edge with
TWIST-LOCK®
FASTENERS
These surfaces
should be even.
Page 14
H
E
Q
419956
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
End without hole
54M
15F
End without hole
www.sauder.com/services