Fitting The Batteries - Fox Digital MX Receiver Mode D'emploi

ENGLISH
Lanyard
Connection
High Quality
Cone Speaker

FITTING THE BATTERIES

STEP 1.
Turn o unit prior to tting or
replacing batteries.
STEP 2. Using a cross head
screwdriver unscrew the two
battery cover screws.
MICRON USER GUIDE
Power and
Volume Control
LED
Light Pipes
STEP 3.
Lift the up the battery cover
from the bottom corners to remove.
STEP 4.
Take care removing the batteries.
Insert new batteries and ensure
correct polarity.
DO NOT over tighten the battery compartment screws,
excessive force will damage the screw threads.
www.foxint.com
FEATURES
• Low Battery Drain
• I-Com®
• Digital Circuitry
• Weatherproof Sealed Case
• Easy Micron Registration
• Multicoulour LED's
Micron
Registration Button
STEP 5.
For best weatherproo ng, ensure
battery cover has a good seal by rmly
pushing lip into the top edge of the case
and pivoting it into position.
STEP 6.
Re- t cover and screws.